49 Surprising Reasons Vibrator Not Working | How to Fix It

here are a variety of vibrator models on the market, including G-spot vibrators, wand vibrators, bullet vibrators, dildo vibrators, and so on. These vibrators bring you a sexually blessed life. Sometimes, there will be trouble that has been bothering you, while occasionally exciting to use. Still, the vibrator suddenly does not work, which is very frustrating.

These sex toy vibrators may be expensive and can last years if you take them seriously. It’s a waste of money to throw them away, so learning how to repair a vibrator is a great thing to invest in, and knowing some common problems guide can save you a fortune.

Read the Manual Carefully

Especially if you have just purchased a new vibrator when you first buy it, you may need to charge it before you can use it properly, so don’t rush to use it.

Each vibrator has a different assembly method, with other forms of use, such as how to use the switch, the battery insertion method, etc. Make sure you have assembled the vibrator correctly and that each device is ideally in the position it should be in.

The Switch is Not Pressed Long Enough / Pressed Too Long

Usually, people hold the control button too long or not long enough, some need to be pressed quickly, and some need to be pressed shortly for a few seconds. We always suggest you familiarize yourself with the control before using it, don’t confuse the user with the rest of the vibrator.

Check the Battery

Be sure that the batteries are placed in the correct position, that the positive and negative poles are not wrong, and that the battery type is not wrong. If you buy a dry vibrator without batteries, you need to buy your batteries.

Some of our vibrator products have small plus and minus symbols on the battery compartment to tell you where to insert the batteries. Most vibrators that use two batteries side by side will require the batteries to be inserted in opposite directions, one facing down and one facing up, rather than in the exact directions.

Replace the battery immediately if you find any signs of acid leakage, corrosion, or disconnected wiring.

Not Working After Battery Replacement

It is recommended that youuse a powerful battery from a well-known brand. Cheap batteries will not give you power, the power drains quickly and will not last very long, and nothing is worse than running out of control at a critical moment.

Don’t mix new batteries with old ones. It’s not a suitable method. It always uses new batteries. Taking them out when not in use when you travel is recommended.

Use Regular Power Batteries

We recommend using regular power batteries. Different batteries can provide different milliamp currents. If you use heavy-duty batteries with too much current, it may cause damage to the circuit board and cause the vibrator not to open properly. The voltage our human body can withstand cannot exceed 36V. Once exceeded may be electrocuted to death.

Check the Power

If the vibrator uses a battery, thencheck whether the battery is still charged. Youcan replace the battery with a new one to try.

If the vibrator uses a rechargeable battery, the battery has been built-in, then check whether the power is sufficient. You can try to re-charge an hour to try. If the charge is an hour later or can not work, it may be the rest of the reason.

Charging Time is Not Long Enough

Many rechargeable products must be fully charged when first used. Each product has detailed instructional information on how long you are advised to charge your sex toy, each manufacturer’s sex toy first charge time is different, and different manufacturers charging times may vary from 2 to 8 hours.